Services
Our Work
Clients
About Us
Contact
Back to Home
Vehicle Wraps

Vehicle Wrap Cost in Utah: Full, Partial, Van and Box Truck, and Lettering Prices

November 20, 20268 min read

An installed vehicle wrap in Utah typically costs $2,500–$5,000 for a full car, $3,000–$6,000 for a van or box truck, $1,000–$2,500 for a partial wrap and $250–$800 for lettering. Size, coverage and design decide where you land.

A professionally installed vehicle wrap in Utah typically costs about $2,500–$5,000 for a full car, $3,000–$6,000 for a van or box truck, $1,000–$2,500 for a partial wrap, and $250–$800 for a lettering and decal package. Those are the typical installed ranges we publish, and where your vehicle lands inside them depends mostly on its size and how much of it you cover.

Below is the full price table, what moves a quote up or down, how long installation takes and how long a wrap lasts. It is written for Utah business owners deciding between a full wrap, a partial wrap or simple lettering.

How much does a vehicle wrap cost in Utah?

These are the installed price ranges we publish on our vehicle wraps page. Each one is for a professionally installed wrap, not vinyl alone.

Wrap typeTypical installed priceWhat it coversUsually a good fit for
Full car wrap$2,500–$5,000Bumper-to-bumper color, graphics and messagingSales and service cars, brand-forward businesses, color changes
Van or box truck wrap$3,000–$6,000The large sides and rear of a cargo van or box truck, printed edge to edgeMovers, contractors, delivery and home-service companies
Partial wrap$1,000–$2,500A section of the vehicle, with the paint color carrying the rest of the designHigh-impact coverage on a smaller budget
Lettering and decal package$250–$800Logo, phone number, website, DOT numbers and contact infoNew businesses, work trucks, lettering-only branding

A range is not a quote. We quote your exact vehicle after seeing the design, because two vans of the same model can land at opposite ends of the range depending on coverage and artwork.

Is a partial wrap much cheaper than a full wrap?

Usually, yes. A partial wrap runs about $1,000–$2,500 installed, while a full car wrap starts around $2,500. The top of the partial range meets the bottom of the full range, so a large partial on a big vehicle can cost about as much as a full wrap on a small car.

A partial wrap works by letting the vehicle's own paint do some of the work. A common rule of thumb is that partials look best when the paint is white, black or close to a brand color, because the printed graphics can blend into it instead of fighting it.

  • Choose a full wrap when you want the whole vehicle in brand colors, need a color change, or want every panel working as advertising.
  • Choose a partial wrap when the paint already suits your brand and you want strong visibility for less.
  • Choose lettering when the goal is simply to put your name, phone number, website and any required numbers on the vehicle. At $250–$800 it is the lowest-cost way to brand a work truck.

How much does it cost to wrap a van or box truck in Salt Lake City?

A van or box truck wrap typically runs $3,000–$6,000 installed. For Salt Lake City customers the vehicles are printed and applied at our shop in American Fork, and for service companies covering the Salt Lake Valley we can wrap a whole fleet at once rather than one van at a time. See our Salt Lake City page for the rest of the work we do there.

Inside that range, the biggest variables are how many sides you cover, whether the cab is included and how much custom artwork the design needs. Box trucks have large flat sides that make excellent billboards, which is why so many movers and haulers wrap them.

A College Hunks Moving box truck with an orange and green custom vehicle wrap parked on a residential street with mountains behind it
Full box-truck wraps for College Hunks Hauling Junk, printed and applied in-house.

Does a box truck need DOT numbers on it?

It might. Under federal rule 49 CFR 390.21, a commercial motor vehicle subject to FMCSA rules must show the carrier's legal or trade name and its USDOT number on both sides, in letters that contrast sharply with the background and are readable from 50 feet in daylight. Whether your truck counts depends on its weight and how it is used, so check with FMCSA before you finalize the design; rules change. Required markings can be built into the wrap or added as part of a lettering package.

What changes the price of a vehicle wrap?

Vehicle size

More surface means more printed vinyl and more installation time. That is why a van or box truck has a higher range than a car.

Coverage

Coverage is the other big lever. Going from lettering to a partial wrap to a full wrap moves you through the ranges in the table above, even on the same vehicle.

Design

We design to your brand and to the vehicle's exact contours, then send a proof for approval before anything prints. Artwork that starts from a finished logo and clear brand colors is usually simpler than a design built from scratch with custom illustration.

Film and laminate

Our wraps are printed on premium cast wrap vinyl with a protective over-laminate for UV and abrasion resistance. A common rule of thumb in the wrap industry is that cast film conforms to curves and recesses better than cheaper calendered film, which is mostly suited to flat surfaces. Comparing quotes that use different films is not an even comparison.

Paint condition

A wrap goes on factory paint in good condition and removes cleanly from it. A common caution is that a wrap will not fix failing or peeling paint, and loose paint can come off with the vinyl later, so mention any paint damage when you ask for a quote.

How long does a vehicle wrap installation take?

Most single-vehicle wraps take about 3–5 business days once the design is approved. Fleets are scheduled in batches so the rest of your vehicles stay on the road. The process looks like this:

  1. Design and proof. We design to your brand and the vehicle's contours, then send a proof for approval.
  2. Print and laminate. The approved design prints on cast wrap vinyl and gets an over-laminate.
  3. Installation. Our own crew installs the wrap on a cleaned, prepped surface for a bubble-free finish.
  4. Care guidance. We show you how to wash and maintain the wrap so it lasts its full life.

How long does a vehicle wrap last in Utah?

A professionally installed cast-vinyl wrap typically lasts about 5–7 years with proper care. Sun exposure, where the vehicle is parked and how it is washed all affect that number. Utah gets a lot of strong sun, so parking in a garage or shade when you can helps the colors and laminate last. Our guide to vehicle wrap care covers washing and day-to-day habits in detail.

Is wrapping a fleet different from wrapping one vehicle?

The per-vehicle ranges above still apply, but fleets add one more goal: every vehicle should look the same. We keep branding consistent across the fleet and schedule installs in batches so your business keeps running. You can see more of that work under fleet graphics.

Three College Hunks moving and junk hauling vehicles parked in a row with matching orange and green vehicle wraps
A matched set of wrapped vehicles: a fleet reads as one brand when every truck uses the same design system.

Frequently asked questions

How much does a full vehicle wrap cost in Utah?

A professionally installed full car wrap typically runs about $2,500–$5,000, and a full van or box truck wrap about $3,000–$6,000. The final number depends on vehicle size, how much of the vehicle you cover and how involved the design is. We quote your exact vehicle after seeing the design, so send the year, make and model with your request.

Is a partial wrap worth it?

For many businesses, yes. A partial wrap typically costs about $1,000–$2,500 installed and still delivers strong visibility, especially when the vehicle's paint color fits your brand. It is a good fit for smaller budgets. If you only need your name, phone number and website on the vehicle, a lettering and decal package at about $250–$800 costs less still.

How long does it take to wrap a vehicle?

Most single-vehicle wraps take about 3–5 business days once the design is approved. Before that, we design the wrap to your brand and the vehicle's contours and send a proof for your approval. For fleets, we schedule vehicles in batches so the rest of your trucks and vans stay on the road while each group is wrapped.

Will a vehicle wrap damage my paint?

Not on factory paint in good condition. On sound paint, a wrap actually protects the surface and removes cleanly, which is one reason wraps are popular on leased and fleet vehicles. If your paint is already chipped, peeling or repainted, tell us when you request a quote so we can look at it before recommending a wrap.

How long does a vehicle wrap last?

A professionally installed cast-vinyl wrap typically lasts about 5–7 years with proper care. Sun exposure, where the vehicle is parked and how it is washed all affect how long it looks its best. Parking out of direct sun when you can and following the care guidance we give at install helps a wrap reach the long end of that range.

Do you wrap vehicles outside American Fork?

Yes. NOTATEK designs, prints and installs wraps for businesses across Utah, including Lehi, Provo, Orem, Salt Lake City and the rest of the Wasatch Front. The wraps are printed and applied at our shop at 1584 S 580 E in American Fork, and fleets can be scheduled in batches so your vehicles are off the road for as little time as possible.

Ready to price your vehicle? Tell us the year, make and model and how much coverage you want on our vehicle wrap quote page, see more examples on the vehicle wraps service page, or call (801) 796-1411.

Vehicle WrapsPublished November 20, 2026
Back to Home

Related Notatek services

Vehicle WrapsDecals & Cut VinylAll ServicesGet a Quote

Request a Quote

Fill out the form and we'll get back to you quickly to discuss your project.

Optional. Pick someone if you already have a contact here.

We never share your email. Privacy Policy.

Protected by reCAPTCHA · Google Privacy & Terms apply.

Your partner for signage, branding, and everything in between.

Company

  • About Us
  • Our Work
  • Services
  • Contact
  • Leave a Review
  • Blog
  • Videos
  • Brand Guide

Services

  • Electric Signs
  • Vehicle Wraps
  • Lobby Signs
  • Environmental Design
  • Decals
  • Promo Materials
  • Apparel
  • Trade Shows
  • Management Platforms

Contact

  • 1584 S 580 E
    American Fork, UT 84003
  • (801) 796-1411
Notatek LLC BBB Business ReviewNotatek LLC BBB Business ReviewClick for Review

© 2026 Notatek. All rights reserved.

Privacy PolicyTerms of ServiceLogin