Services
Our Work
Clients
About Us
Contact
Lehi Sign Permits and Landlord Sign Criteria: A Tenant's Guide
Back to Home
Exterior Signage

Lehi Sign Permits and Landlord Sign Criteria: A Tenant's Guide

November 21, 20269 min read

Yes: Lehi requires a sign permit for nearly every exterior business sign, while window decals and interior signs are exempt. Leased spaces also need landlord criteria approval, and the sign company usually prepares the drawings and files the permit.

Yes. Lehi City requires a sign permit before you put up or change almost any exterior business sign, including wall signs, channel letters, monument signs and pylons. The main exceptions are window and door decals, signs inside the building and signs not visible from a public street. If you lease your space, the landlord's sign criteria have to approve the design too, and your sign company normally prepares the drawings and files the application.

Last verified against Lehi City sources on November 17, 2026. Lehi amended its sign chapter on August 11, 2026, and rules change, so check with the city before you order a sign.

What does Lehi's sign ordinance cover?

Lehi's sign rules are in Chapter 23 (Signs) of the Lehi City Development Code. The current text says no sign may be placed or modified without a sign permit except for the listed exemptions, and the Planning Division reviews every application. Older copies still circulate, including a May 2024 version. Read the copy marked "Amended 8/11/26".

The exemptions that matter most to business tenants (Section 23.030):

  • Decals or logos on building windows, door panels or vehicles.
  • Signs inside a building, which is why most lobby signs need no city sign permit.
  • Signs not visible from a public right-of-way.
  • Building address signs under six square feet.
  • Temporary signs of four square feet or less.

Which Lehi signs need which approval?

Under Section 23.040, the Zoning Administrator approves most permanent signs in non-residential zones. A short list goes to the City Council after a Planning Commission recommendation and public hearing.

Sign typeWho approvesKey limits in Chapter 23
Wall signs and channel lettersZoning AdministratorUp to 15% of the primary wall or 600 sq ft, whichever is less; 5% of each secondary wall; no more than 18 inches off the building face; nothing above or below the wall
Monument signsZoning AdministratorParcel needs at least 60 ft of street frontage; 6 ft and 60 sq ft at 60 to 175 ft of frontage, up to 14 ft and 140 sq ft at 226 ft or more; 12 ft maximum width; opaque pedestal at least 1 ft high
Pylon signsZoning Administrator; City Council for size or height exceptionsGenerally on lots of 3 acres or more, or with 300 ft or more of collector or arterial frontage; 25 ft and 200 sq ft maximum; never over 70 ft or 600 sq ft
Projecting and suspended signsZoning Administrator2% of the wall or 20 sq ft, whichever is less; 4 ft maximum projection; 8 ft clearance; street-level tenants only
Electronic display signsZoning Administrator up to 50 sq ft; City Council above thatOnly as part of a monument, pylon, canopy, marquee or civic sign; each message holds at least 3 seconds; automatic dimming; none on Main Street between 500 East and 500 West
Window decals and interior lobby signsExempt from the sign permitLandlord criteria and your brand standard still apply

What are landlord sign criteria?

Sign criteria are the property owner's own rules for every tenant sign on a building or center. They usually set sign location, maximum letter height, colors, lighting style and mounting. They come from your lease, not the city, and are usually stricter than the code.

That matters because the city's allowance belongs to the wall, not to you. Chapter 23 lets a wall's sign area be spread across several signs, including signs from multiple tenants in a shared office or commercial building. The landlord's criteria decide your share. In Lehi's newer Class A office parks along the SR-92 corridor and around Thanksgiving Point, the landlord often owns the sign band and the monument, and tenant identity is limited to a panel. That is why many Lehi tech tenants spend their sign budget in the lobby instead (see our Lehi page).

How do the ordinance, landlord criteria and brand standard fit together?

In a Lehi office park or retail center you are usually designing to three documents at once, and they disagree more often than anyone expects. A brand's minimum logo size can exceed the letter height the landlord allows on the fascia.

DocumentWho controls itWhat it typically decides
City ordinance (Chapter 23)Lehi CityMaximum sign area, height and projection, illumination rules, and which signs need a permit
Landlord sign criteriaProperty owner or managerLocation on the building, letter height, colors, lighting style, and landlord approval before anything goes to the city
Brand standardYour company or franchisorLogo lockup, clear space, minimum size and exact colors

We design to whichever rule is stricter on each point. We would rather find a conflict in the drawing stage than on the wall.

Who submits the sign permit in Lehi, you or the sign company?

Usually the sign company. Lehi's Application for Sign Permit names three parties: the applicant, who is the primary contact and is responsible for all submittal information; the property owner, who must sign to authorize the filing; and the company installing the sign. On NOTATEK projects we prepare the drawings and specifications and submit for landlord and city approval. Your part is to send the landlord's criteria and your brand files, and to get the property owner's signature.

What goes into a Lehi sign permit submittal?

Section 23.100 and the current application form ask for the following, submitted electronically through the city's online portal (linked from the Lehi Planning applications page):

  • A completed application with ownership and contact information, plus the fee. A separate application may be required for each sign.
  • Accurately dimensioned, scaled drawings showing height, width, square footage, colors, fonts, and the type and intensity of illumination.
  • Renderings or photos of the sign as seen from the street. Wall signs also need a profile drawing showing every existing and proposed sign on that wall, plus wall dimensions and percent coverage.
  • Construction details, including the support structure and the electrical plan.
  • For monument and pylon signs, a plot plan showing property lines, setbacks, easements, driveways, the 35-foot clear vision zone, site acreage and street frontage.
  • For signs next to a state right-of-way, written verification that you coordinated with UDOT.

The form lists the planning fee for each sign type and notes that building permit fees are separate. According to the Planning page, freestanding sign structures such as monument and pole signs also need a building permit, while wall signs on a building do not need a building permit but still must be approved in planning. When a building permit is required, the sign application comes first. Building permits are handled by Lehi Building and Inspections.

Lehi Bakery monument sign with black dimensional lettering on a brick and stucco base, built and installed by NOTATEK
A dimensional monument sign for Lehi Bakery, part of a package with illuminated channel letters and window vinyl.

Step by step: how a Lehi sign gets approved and installed

  1. Gather the documents. Send the landlord's criteria, your brand standards and the address.
  2. Site survey. We measure the wall or frontage and check the mounting surface, power and sightlines.
  3. Design to the strictest rule. We size the sign the way Lehi measures it: for individual letters, the smallest eight-sided shape that encloses all the copy; for a sign on a background panel, the outside of the panel.
  4. Landlord approval. The landlord or property manager signs off on the drawings.
  5. City submittal. We file the drawings and specifications with the owner's signature, plus a building permit application if the sign needs one.
  6. Fabrication. The sign is built in our American Fork shop.
  7. Installation. Our own crew mounts, wires and inspects it.

Most electric sign projects run about 4 to 8 weeks from approved design to installation, driven mainly by permitting and fabrication. A storefront channel-letter set commonly runs about $2,000 to $8,000 installed, and freestanding monument or pylon signs run from roughly $5,000 to $25,000+. In Lehi, the schedule depends on art approval and the landlord and city reviews, not the eight-mile drive from our shop. See finished exteriors on our storefront signage page.

Frequently asked questions

Do I need a city permit for a lobby sign in Lehi?

Usually not. Section 23.030 of Lehi's Chapter 23 exempts signs inside a building from the sign permit. Most leased offices still need landlord approval, so send the landlord the drawings first. A dimensional lobby logo typically runs about $800 to $3,500 installed and takes about 2 to 3 weeks from approved artwork for non-illuminated letters. Check with the city before you order, because rules change.

Do window decals need a sign permit in Lehi?

Decals or logos on building windows and door panels are listed as exempt from Lehi's sign permitting rules in Section 23.030 of Chapter 23. Your lease may still control what goes on the glass, so check your landlord's sign criteria first. Large banners and temporary signs over four square feet are treated differently and need a permit. Rules change, so confirm with Lehi Planning before you install.

If the city allows a bigger sign than my landlord does, which wins?

The stricter one. Chapter 23 sets the maximum the city will permit, but your lease and the landlord's sign criteria can allow less, and the property owner has to sign your permit application. In shared buildings the city's wall allowance can be split among several tenants, so your share is usually set by the landlord. We design to whichever rule is stricter on each point.

Can I reuse the old sign cabinet when I take over a space?

Possibly, but it still needs city approval. Lehi's Section 23.110 says changes to an existing sign, including changes in size and graphics, must be approved by the Zoning Administrator, and the permit form has a sign face change option. Under Section 23.120, a nonconforming sign cannot be enlarged, raised or moved unless it is brought up to the current code. Check with the city first; rules change.

How long does a Lehi sign project take?

Chapter 23 does not publish a review time, so plan for landlord approval, city review and fabrication in sequence. Most of our electric sign projects run about 4 to 8 weeks from approved design to installation, driven mainly by permitting and fabrication. A single channel-letter set is faster; a large monument sign takes longer. Early landlord and brand sign-off on drawings helps most.

Planning a sign in Lehi? Send your landlord's sign criteria and logo files through our electric sign quote form, or call (801) 796-1411. We design, build and install in-house from our shop at 1584 S 580 E in American Fork, about 12 minutes from central Lehi, and we handle the permit drawings.

Exterior SignagePublished November 21, 2026
Back to Home

Related Notatek services

Electric SignsEnvironmental DesignAll ServicesGet a Quote

Request a Quote

Fill out the form and we'll get back to you quickly to discuss your project.

Optional. Pick someone if you already have a contact here.

We never share your email. Privacy Policy.

Protected by reCAPTCHA · Google Privacy & Terms apply.

Your partner for signage, branding, and everything in between.

Company

  • About Us
  • Our Work
  • Services
  • Contact
  • Leave a Review
  • Blog
  • Videos
  • Brand Guide

Services

  • Electric Signs
  • Vehicle Wraps
  • Lobby Signs
  • Environmental Design
  • Decals
  • Promo Materials
  • Apparel
  • Trade Shows
  • Management Platforms

Contact

  • 1584 S 580 E
    American Fork, UT 84003
  • (801) 796-1411
Notatek LLC BBB Business ReviewNotatek LLC BBB Business ReviewClick for Review

© 2026 Notatek. All rights reserved.

Privacy PolicyTerms of ServiceLogin